Quality Increase: The most important reason for the increase in quality is that the time of removing the material from the mold is equal to each other. Therefore, product quality is also equal. In addition, since the parts are always taken at the same speed and shape by the robot, a distortion, contamination, handprint, part fall trace, scratch, etc. no quality-deteriorating factors.

Time Saving: Using a robot, it is possible to reduce lost times, especially during the night shift. Studies have shown that the operators working in the night shift have a lower limit of attention and efficiency than those working in the day shift. (low attention, low working speed, more breaks, smoking etc.)

Reducing Costs: As the robot issues goods faster than the operator, the direct production quantity increases and the cost per piece decreases. 15% and more production increase can be achieved depending on the robot type. It is possible to get more production increase depending on the mold design. Depending on the type of robot, a labor reduction of 1/3 to 1 is achieved. Even the workmanship may disappear completely depending on the mold design. In addition, depending on the type of robot, some side work (stacking, packing, sprue cutting etc.), the robot performs a significant amount of workmanship with this kind of direct and indirect work reduction.

Waste Reduction: Since it is a constant cycle, the injection machine operates more efficiently, the next pressure is prevented from coming out of order due to the mold being too open and cooling down, the wastage is reduced. The wastage created by the falling of the piece from the mold decreases. Depending on the design of the mold, this type of wastage can be reduced to zero.

Shortening Delivery Times: Since the amount of production increases and a more regular production is made, the delivery time of orders decreases. A better production planning is made. Waste and production speed is made more controlled. Thus, a more accurate planning can be made.

Reduced Space Requirement: The reduction of space required for operation due to the reduction of wastage, stacking of the material and the disappearance of some workmanship also provides an advantage to the enterprise in the direction of reducing costs. This amount of earnings varies depending on the product and the amount and sizes of waste.

Demand by the Customer: Today, the use of robots is also demanded by the customer, especially in the production of medical materials, optical components, technical and aesthetic parts.

 

Comments